Our range of AZCO modular guillotine knife assemblies includes ready to install as stand-alone or in-line units. These units can be mounted in any position for convenient operation and cut a wide variety of flexible materials. The open-frame design gives easy access to the material and mounting holes allow quick installation. We also offer our GC and GH series for wider materials.
SUR-CUT GUILLOTINE KNIFE ASSEMBLY | GO-25
The smallest cutter, model GO-25, has a unique scissor-style action. Applications include cables, rods, and heavier gauge materials. This unit is not recommended for use on materials under 13mm in thickness. It can cut small cables/rods with diametres up to:
- 4.2mm plastic
- 3.2mm aluminum or copper
- 1.5mm steel
GO-25 Guillotine Knife Assembly DATA SHEET
SUR-CUT GUILLOTINE KNIFE ASSEMBLY | GO-80
- Cutting Rate: Up to 200 cuts per minute. Rate is governed by air pressure and flow rate.
- Construction: Aluminum anodized frame, tool steel blades, linear bearings.
- Power Requirements: 30-90 psi [2 – 6 bar] compressed air (depending on material).
GO-80/110/160 Guillotine Knife Assembly DATA SHEET
SUR-CUT GUILLOTINE KNIFE ASSEMBLY | GO-110
- Proven, off-of-the-shelf design
- Holes provided for mounting on flat, single-plane surfaces
- D2 hardened tool steel blades for long life
- Simple installation and hook-up
- Clean cuts and low maintenance
GO-80/110/160 Guillotine Knife Assembly DATA SHEET
SUR-CUT GUILLOTINE KNIFE ASSEMBLY | GO-160
- SMARTKNIFE™ package
- Blade position sensors
- Custom blade geometry
GO-80/110/160 Guillotine Knife Assembly DATA SHEET
SUR-CUT GUILLOTINE KNIFE ASSEMBLY | GC-250 | GC-400 | GC-630
- Proven, off-of-the-shelf design providing simple installation and hook-up
- Holes provided for mounting on flat, single-plane surfaces
- D2 hardened tool steel blades for long life
GC-250/400/630 Guillotine Knife Assembly DATA SHEET
SUR-CUT GUILLOTINE KNIFE ASSEMBLY | GH-1000
-
-
- Cutting Rate: Up to 150 cuts per minute. Rate is governed by air pressure and flow rate.
- Construction: Aluminum anodized frame, tool steel blades, linear bearings.
- Power Requirements: 30-90 psi [2 – 6 bar] compressed air (depending on material).
-
GH-1000 Guillotine Knife Assembly DATA SHEET
SMARTKNIFE™ | SKC-250 | SKC-400 | SKC-630 | SKC-1000
The SMARTKNIFE™, with a patent-pending technology making it operate at a high-cycle rate, features quiet operation and simple installation. Unlike traditional knife assemblies, the SMARTKNIFE™ has taken all the essentials of a knife assembly and integrated it into a compact package; all you need is an air supply and a signal.
The SMARTKNIFE™ is pneumatically-operated with a self-contained air cylinder/manifold/solenoid. You no longer need to spend the time or labour to install air lines, fittings, or sensors to control the knife position. The SMARTKNIFE™ is equipped with an embedded microprocessor and complete control package which allows the knife to achieve higher speeds than the standard guillotines presently reach. With cycle rates exceeding 400 cuts per minute, this unit is bridging the gap between a conventional guillotine and a rotary knife assembly. Its compact size and low prices offer great flexibility over a rotary knife solution.